Setting up the Licensed Edition of PSCAD (when using Certificate Licensing)

This article provides instructions for setting up PSCAD software and licensing for a permanent or leased license, and is applicable for both Professional and Educational Editions, and for PSCAD v4.5.3 to v4.6.

To set up your software, please refer to the attached guide “Quick Start Setup Instructions”.

Or for more detailed instructions, please refer to Section 2.2.1 of the attached document “Detailed Setup Instructions”.

Please note the following regarding your software installation:

  • For PSCAD v4.6.3, Update 4 is available. See this article for information on improvements and setup.
  • A silent (unattended) installation is available if you will be installing PSCAD on multiple machines.  Please refer to Section 2.9 of this manual.