The Squirrel Cage Induction Machine can be easily interfaced with the Multi-Mass Torsional Shaft component as illustrated below:
The multi-mass component is configured for use with the induction machine (For Use With... input parameter set to Ind_Machine), and the machine component is set to enable the multi-mass interface (Multimass Interface input parameter set to ENABLE).
Here, the machine is automatically operated in speed control mode supplying the multi-mass component with a calculated electrical torque Te and an external load torque signal TL. The speed control signal W is then generated by the multi-mass component, for input into the machine.
As shown above, the load torque, although connected to the machine, is passed unaltered through the machine, directly to the multi-mass component.
