Mutually Coupled Wires (Three Lines)

This component models three wires (conductors) that are mutually coupled. The data required are the resistances of the conductors, the self inductances of the conductors and the mutual inductance between the conductors.

NOTE: The values entered for inductances and resistances must be realistic to ensure an error free simulation!

Input Parameters

Graphic Display

Choice

Select 3 phase view, or Single line view

Enter Resistance/

Inductance Values As

Choice

Select Individual Components, or Sequence Components.

Select Individual Components if the inductance and resistance values are to be entered directly. Select Sequence Components if the inductance and resistance values are to be entered as positive sequence and zero sequence values

NOTE: These parameters are enabled only if Enter Resistance/Inductance Values As is set to Individual Components.

Resistance (A)	REAL	Constant	Enter the resistance of conductor A [W]

Resistance (B)	REAL	Constant	Enter the resistance of conductor B [W]

Resistance (C)	REAL	Constant	Enter the resistance of conductor C [W]

Self Inductance (A)	REAL	Constant	Enter the self inductance of conductor A [H]

Self Inductance (B)	REAL	Constant	Enter the self inductance of conductor B [H]

Self Inductance (C)	REAL	Constant	Enter the self inductance of conductor C [H]

Mutual Inductance (A-B)	REAL	Constant	Enter the mutual inductance between conductors A and B [H]

Mutual Inductance (B-C)	REAL	Constant	Enter the mutual inductance between conductors B and C [H]

Mutual Inductance (A-C)	REAL	Constant	Enter the mutual inductance between conductors A and C [H]

NOTE: These parameters are enabled only if Enter Resistance/Inductance Values As is set to Sequence Components.

Positive Sequence Resistance	REAL	Constant	Enter the positive sequence resistance [W]

Positive Sequence Inductance	REAL	Constant	Enter the positive sequence inductance [H]

Zero Sequence Resistance	REAL	Constant	Enter the zero sequence resistance [W]

Zero Sequence Inductance	REAL	Constant	Enter the zero sequence inductance [H]

Mutually Coupled Wires (Three Lines)

Description

Input Parameters