The Node Label component may be placed only upon an electrical wire. Its express purpose is to provide a unique name for a particular electrical node, which will be both displayed on the schematic, an used as a unique identifier in the project source code. Electrical nodes that are not associated with a node label (or named by a component) are given a generic name when the project source code is constructed (ex. NT_1, NT_33, etc.). See EMTDC System Dynamics for more.
The node label also includes an optional voltmeter to measure node-to-ground voltage.
|
Electrical Node Name |
|
Text |
|
Enter a name for the electrical node. This name will be used throughout the EMTDC System Dynamics and hence, it should conform to Fortran standards for variables (alpha-numeric name with first letter being a non-numeric). |
|
|
|
|
|
|
|
Measure Voltage and Create Local Signal? |
|
Choice |
|
Select Yes or No to measure the voltage at the node defined by this component |
|
|
|
|
|
|
|
Normalize Measured Voltage? |
|
Choice |
|
Select Yes or No. This input is used along with Base Voltage (L-G) for Normalizing |
|
|
|
|
|
|
|
Voltage Signal Name |
|
Text |
|
Enter a name for the measured voltage signal. See Voltmeters for more details |
|
|
|
|
|
|
|
Base Voltage (L-G) for Normalizing |
|
REAL |
Literal |
Enter the base voltage for the purpose of normalizing calculations. |