Just an identifier. A name
should be entered here to avoid compilation warnings.
RMS Magnitude
REAL
Constant
Enter the RMS magnitude of
the source current [kA].
Frequency
REAL
Constant
Source frequency [Hz].
Initial
Phase
REAL
Constant
Initial source phase shift
[deg].
Ramp Up
Time
REAL
Constant
Enter a time for the source
to ramp up to 1.0 pu.
Use a minimum ramp up time of 3 times the fundamental frequency
period (i.e. 0.05 s
for 60 Hz and 0.06 s for 50
Hz) in most cases to reduce start-up transients [s]
Is This
Source Grounded?
Choice
Select Yes
or No.
Selecting Yes will
add a ground to one end of the source.
